<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 8776] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>1</x>
    <y>0</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>DESS - NB AC ASC Pre-Milled Ti IO - FDA</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>DESS_NB_AC_ASC_PRE-MILLED_IO_fda</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <ReferenceHeightOffset>0</ReferenceHeightOffset>
  <ReferenceRotationOffset>30</ReferenceRotationOffset>
  <RotationLockCount>6</RotationLockCount>
  <Supplier>DESS® Dental Smart Solutions by Terrats Medical S.L.</Supplier>
  <SupplierLink>https://www.dessdental.com/</SupplierLink>
  <LegalInformation>FDA cleared components – Design results generated with this library can only be milled by a validated milling center. Please get in contact with the component manufacturer for further information.</LegalInformation>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <SupplierV4IconFilename>dess.jpg</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.2519989013671875</x>
        <y>-0.0031410455703735352</y>
        <z>13.992486953735352</z>
      </RegistrationClickCenter>
      <MarkerFilename>50068_Scanbody.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - DESS Desktop</DisplayInformation>
      <Keyword>30DESSDesktop</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8990020751953125</x>
        <y>0.0005200263112783432</y>
        <z>6.2497076988220215</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.068_Intraoral.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - DESS IntraOral</DisplayInformation>
      <Keyword>30DESSIntraOral</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.25</x>
        <y>-0.00069570541381835938</y>
        <z>13.702232360839844</z>
      </RegistrationClickCenter>
      <MarkerFilename>EXTISA.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - DESS IntraOral Extender</DisplayInformation>
      <Keyword>30DESSIntraOralExtender</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.3772354125976563</x>
        <y>0.72718429565429688</y>
        <z>10.288376808166504</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0.86605776859505124</x>
        <y>0.49994393831324796</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>c19235.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - ELO IO 2B-D/SA</DisplayInformation>
      <Keyword>30ELOIO</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5999984741210938</x>
        <y>-0.032521605491638184</y>
        <z>8.06261157989502</z>
      </RegistrationClickCenter>
      <MarkerFilename>IOFLO-38.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - ATLA IO FLO</DisplayInformation>
      <Keyword>30ATLAIOFLO</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.529998779296875</x>
        <y>-0.00069892406463623047</y>
        <z>8.7198638916015625</z>
      </RegistrationClickCenter>
      <MarkerFilename>F1420.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - Medentika</DisplayInformation>
      <Keyword>30Medentika</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5</x>
        <y>-0.008648991584777832</y>
        <z>8.9730157852172852</z>
      </RegistrationClickCenter>
      <MarkerFilename>TruAbutment_NB_AC_30.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - TruAbutment</DisplayInformation>
      <Keyword>30TruAbutment</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.75</x>
        <y>-0.0037999153137207031</y>
        <z>9.1274127960205078</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>9004745 Ti NB Actv 30.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.468.sdfa</ScrewFilename>
      <ImplantFilename>14.068.sdfa</ImplantFilename>
      <DisplayInformation>3.0 - Preat Ti</DisplayInformation>
      <Keyword>30PreatTi</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.349_base.sdfa</SupportFilename>
          <InterfaceFilename>61.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.349</DisplayInformation>
          <Keyword>TypeA-61349</Keyword>
          <AxisScrewChannel>
            <x>0.360622</x>
            <y>-0.208</y>
            <z>0.9406288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.349_base.sdfa</SupportFilename>
          <InterfaceFilename>71.349.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.349</DisplayInformation>
          <Keyword>TypeB-71349</Keyword>
          <AxisScrewChannel>
            <x>0.422618261967725</x>
            <y>0</y>
            <z>0.95063077869307855</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.2519989013671875</x>
        <y>-0.000618860125541687</y>
        <z>13.99543285369873</z>
      </RegistrationClickCenter>
      <MarkerFilename>50041_Scanbody.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - DESS Desktop</DisplayInformation>
      <Keyword>NPDESSDesktop</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8990020751953125</x>
        <y>0.00025790184736251831</y>
        <z>6.2499332427978516</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.041_Intraoral.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - DESS IntraOral</DisplayInformation>
      <Keyword>NPDESSIntraOral</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.25</x>
        <y>-0.0066561028361320496</y>
        <z>13.686434745788574</z>
      </RegistrationClickCenter>
      <MarkerFilename>EXTISA.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - DESS IntraOral Extender</DisplayInformation>
      <Keyword>NPDESSIntraOralExtender</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
          <ImplantConnection>
            <ID>NB_CC_P35-NP</ID>
          </ImplantConnection>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.6102066040039063</x>
        <y>-0.015038490295410156</y>
        <z>10.236245155334473</z>
      </RegistrationClickCenter>
      <MarkerFilename>c19236.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - ELO IO 2B-A/SA</DisplayInformation>
      <Keyword>NPELOIO</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5999984741210938</x>
        <y>-0.030346274375915527</y>
        <z>8.0660305023193359</z>
      </RegistrationClickCenter>
      <MarkerFilename>IOFLO-38.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - ATLA IO FLO</DisplayInformation>
      <Keyword>NPATLAIOFLO</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0.013291820883750916</x>
        <y>-2.3000030517578125</y>
        <z>8.2533130645751953</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>-1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>NT_F_3.5.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - NT</DisplayInformation>
      <Keyword>NPNT</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>60</ReferenceRotationOffset>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5600051879882813</x>
        <y>0.012500762939453125</y>
        <z>8.92210578918457</z>
      </RegistrationClickCenter>
      <MarkerFilename>F1400.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - Medentika</DisplayInformation>
      <Keyword>NPMedentika</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5499954223632813</x>
        <y>-0.012140512466430664</y>
        <z>9.0013999938964844</z>
      </RegistrationClickCenter>
      <MarkerFilename>TruAbutment_NB_AC_NP.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - TruAbutment</DisplayInformation>
      <Keyword>NPTruAbutment</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.47760009765625</x>
        <y>-0.0052813589572906494</y>
        <z>10.087321281433105</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>8000840 blue NB Actv NP.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - Preat blue</DisplayInformation>
      <Keyword>NPPreatblue</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.75</x>
        <y>-0.0048770904541015625</y>
        <z>9.1379585266113281</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>9000845 Ti NB Actv NP.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.441.sdfa</ScrewFilename>
      <ImplantFilename>14.041.sdfa</ImplantFilename>
      <DisplayInformation>NP - Preat Ti</DisplayInformation>
      <Keyword>NPPreatTi</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P35-NP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>61.341_base.sdfa</SupportFilename>
          <InterfaceFilename>61.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.341</DisplayInformation>
          <Keyword>TypeA-61341</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.341_base.sdfa</SupportFilename>
          <InterfaceFilename>71.341.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.341</DisplayInformation>
          <Keyword>TypeB-71341</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.2519989013671875</x>
        <y>0.011864423751831055</y>
        <z>13.996971130371094</z>
      </RegistrationClickCenter>
      <MarkerFilename>50042_Scanbody.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - DESS Desktop</DisplayInformation>
      <Keyword>RPDESSDesktop</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.8990020751953125</x>
        <y>0.00096994638442993164</y>
        <z>6.2498331069946289</z>
      </RegistrationClickCenter>
      <MarkerFilename>52.042_Intraoral.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - DESS IntraOral</DisplayInformation>
      <Keyword>RPDESSIntraOral</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.25</x>
        <y>0.033413618803024292</y>
        <z>13.691463470458984</z>
      </RegistrationClickCenter>
      <MarkerFilename>EXTISA.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - DESS IntraOral Extender</DisplayInformation>
      <Keyword>RPDESSIntraOralExtender</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.8876495361328125</x>
        <y>0.039902925491333008</y>
        <z>9.9909610748291016</z>
      </RegistrationClickCenter>
      <MarkerFilename>c19237.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - ELO IO 2B-B/SA</DisplayInformation>
      <Keyword>RPELOIO</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5999984741210938</x>
        <y>-0.03026590496301651</y>
        <z>8.0685262680053711</z>
      </RegistrationClickCenter>
      <MarkerFilename>IOFLO-38.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - ATLA IO FLO</DisplayInformation>
      <Keyword>RPATLAIOFLO</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-0.006504058837890625</x>
        <y>-2.3000030517578125</y>
        <z>8.8145046234130859</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>0</x>
        <y>-1</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>NT_F_4.3_5.0.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - NT</DisplayInformation>
      <Keyword>RPNT</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>60</ReferenceRotationOffset>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.7600021362304688</x>
        <y>-0.003749847412109375</y>
        <z>8.7231626510620117</z>
      </RegistrationClickCenter>
      <MarkerFilename>F1410.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - Medentika</DisplayInformation>
      <Keyword>RPMedentika</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.7999954223632813</x>
        <y>0.015322685241699219</y>
        <z>8.815312385559082</z>
      </RegistrationClickCenter>
      <MarkerFilename>TruAbutment_NB_AC_RP.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - TruAbutment</DisplayInformation>
      <Keyword>RPTruAbutment</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-1.627532958984375</x>
        <y>0.0015133712440729141</y>
        <z>10.089615821838379</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>8000940 blue NB Actv RP.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - Preat blue</DisplayInformation>
      <Keyword>RPPreatblue</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>-2.25</x>
        <y>0.02425847202539444</y>
        <z>9.1278219223022461</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>9000945 Ti NB Actv RP.stl</MarkerFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true">blank premilled_14mm Ti.sdfa</PremillAbutmentColliderFilename>
      <ScrewFilename>19.442.sdfa</ScrewFilename>
      <ImplantFilename>14.042.sdfa</ImplantFilename>
      <DisplayInformation>RP - Preat Ti</DisplayInformation>
      <Keyword>RPPreatTi</Keyword>
      <PremillHeight>20</PremillHeight>
      <PremillUsableHeightLimitFromTop IsDesignConstraint="true">19</PremillUsableHeightLimitFromTop>
      <ImplantConnection>
        <ID>NB_CC_P39-RP</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>61.342_base.sdfa</SupportFilename>
          <InterfaceFilename>61.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type A - 61.342</DisplayInformation>
          <Keyword>TypeA-61342</Keyword>
          <AxisScrewChannel>
            <x>0.365780622</x>
            <y>-0.211767644</y>
            <z>0.906288624</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>71.342_base.sdfa</SupportFilename>
          <InterfaceFilename>71.342.sdfa</InterfaceFilename>
          <DisplayInformation>Type B - 71.342</DisplayInformation>
          <Keyword>TypeB-71342</Keyword>
          <AxisScrewChannel>
            <x>0.422618262</x>
            <y>0</y>
            <z>0.906307787</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2024-02-23T13:43:01.6764640Z</SignatureDate>
  <InfoSignature>Not yet signed</InfoSignature>
  <InfoSignatureV3>GFkBBPE9WkPVRAUXh3c0DzyYVX2c5lBP7tqt4M+ydmbY+3/tHTx6p3XRLgidTm97YlTt5xezISQc+TOLrujq/CDwhkGp3zed1wwHrSJ9g239i5Z0iQiTkPpOhMC83mu0mLH97Ve3hAeQYeWcKZ4Lyne/fMeMcvYHeNVNFfUM/2Ib8QISxmxvLXsQNDaaj2jbZyLsXyKeHwifniX2yvPHzVYmLyogPEU/21pbMt1QumaBZEYJwWmmUXwOsO8FvsZqTS8GBg7h2E1+KuNnkUCX8j+cQcfdHhHF4t7+dkrsf3nauN0dpRlZOZ48g4qjSOyOdLeln+QLoG1wCmKicJcZ+w==</InfoSignatureV3>
  <InfoSignatureV4>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</InfoSignatureV4>
  <InfoSignatureV5>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</InfoSignatureV5>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>dess.jpg</Filename>
      <Signature>ZrFeGFgU0KioHQ7DSEQxGGyBXVEGcL364DmkItJTEGQ3bAZWul+2J/kn5gXTdRx5JKRCNuGziHu8AohSRgNLOw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>50068_Scanbody.stl</Filename>
      <Signature>Mcz/TNmFfq1ZyP2K0ft2LHJcBleTjERkT/uecCHApCF6/3G03Lw11WvFxyROWmJNTwZDgQkw7MnrYlMJI4jx9Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>14.068.sdfa</Filename>
      <Signature>3bCIxyzadzXlSKxHrg8Ktw2L2stt326rR5fBSTaxcQPqkrUSw6WdcpbmuVaci1BfNqkuVl+OC8wSWSU16aLv8w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>19.468.sdfa</Filename>
      <Signature>pAkT3fU7vPS8D0i67/9BXJ2CZnfaUCzhk9A4sSeqsTa7in/NG71SQnDEG+hzGNlL9lq1dPGVqxCIHLGRJlkQJw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>pell_61.349_71.349_min_thick.sdfa</Filename>
      <Signature>MP90I0z0Of+eXVeEH2k+23nEczgIfSINtNqe+g0vQNgZTtWvkT2N3N1g3pi60BWP9SHBM5a1eIV0nec3d7WEzg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>61.349_base.sdfa</Filename>
      <Signature>0fUgLseTnlGqw699UyZnGZ37w6c42XtDRp8kamXHeTwBxW2D34yFyAklryA0om/bklzz17zA+RpraGmgRmcMbg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>61.349.sdfa</Filename>
      <Signature>pkC5Yb+eyq7wOv9Wz6j6tv6/KypRjHxjAI1Bh73B14LZGr35QQLSBccecEclu5DMA1XIns7K3YXYmDO9si6lFA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>71.349_base.sdfa</Filename>
      <Signature>0fUgLseTnlGqw699UyZnGZ37w6c42XtDRp8kamXHeTwBxW2D34yFyAklryA0om/bklzz17zA+RpraGmgRmcMbg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>71.349.sdfa</Filename>
      <Signature>VO700xyMGus3ccaHlA/tQDCyyxHDWfYBe0VJLeIKcFIKvknf+UojuiOZVG/vaskh6byDec4w0bngUgOkGdUw0Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>52.068_Intraoral.stl</Filename>
      <Signature>kDzxqDI/jZizxG0INLHhKI2EFwYCaR3QIzGdmbQrmbRK2mgtOdibOGDuK26okVBE6rhvTDKl3yaIS9oTeIxk9Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>EXTISA.stl</Filename>
      <Signature>UvYpEQqfdPHkDfmWNAewGcbSF1uQw4qAfwQLAUYYJ1qDMXqu0mEesvfnOiBmj1XaUEx+bEhwqUpUft0MbOV4jQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>c19235.stl</Filename>
      <Signature>VwC/NBR/9HR5whAWs14tcRn74vlxJFRoN2AewNQcKxPgv282n/DWkSSI/MgnkGHEoVu0GMleOfymssVvrkd90A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>IOFLO-38.stl</Filename>
      <Signature>R3fAAGJtedWZyGhPQnshUpNnx+NgyC/1f6Mmafaj8Hs74Kn8NPeDhtTDG4A19dW9LzpNhKd8czne6T8cwOmWIA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>F1420.stl</Filename>
      <Signature>88mejq1z/8FKjthbf5DhPdpZnFsUcvZM+yHB5Ujz0Ldkiy5IA7uLr3Jl/LtmmTdhK5yUPYACw9RKn1TsmkNcpQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>TruAbutment_NB_AC_30.stl</Filename>
      <Signature>t2MZ5dcuCewHCJwhweMKqcHERz2GSGbYKa8qJlT5VWebBkTfMLU1xNYc/FZlvZ45dynOSJ3BegDvLADu+tCryw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>9004745 Ti NB Actv 30.stl</Filename>
      <Signature>/iyj9mbOSsmx3GSeHTLz5+w6NIIO81H5FglsVBbTxNDKNR2kouts7CWIUduuNje2BTQymupWHmkyZ3+MCdUQtA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>50041_Scanbody.stl</Filename>
      <Signature>C3PSuTTX3FcuHmalpW7nQxd8ro+oa3Be2pxpXIKi2nqoqXUGL7yWHSRi47b10UIiXfu0yfeVUrSB27ZvvgOr+Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>14.041.sdfa</Filename>
      <Signature>va6bvKrtuYJS8UvN+U1oIxVuqUmOWnqFm55NI90lOiH7RsoIjjPMMzH+BWpixcxd3MCafNEYworX0V0u3uj1qg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>19.441.sdfa</Filename>
      <Signature>1jRiHuMcV+fTjhkwNMuPQ8AASugXBpA1FlnJLofE5XhdmnhrV0MdxAkfk2xxNBN2mbkUqNTIw4o5AQn+aDpn8Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>pell_61.341_71.341_min_thick.sdfa</Filename>
      <Signature>XcTdxyhgs2QsZgSArx4JC9f/n/5MeDVplMmw3JOvG7cvmEl6OX8IZvQ6IhuXFAfHIVvbazKbiC5Gv/FeOJDlTQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>61.341_base.sdfa</Filename>
      <Signature>nfTS5bDPshEvzmKe0rVDjFGzOpOgvxR7HErQKUs+LmeENrSpydzQ2k81MjzzYkN5uDEVEjEinQ2aJRNWB7+cNQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>61.341.sdfa</Filename>
      <Signature>NnQL1slyM3izv/Qx0B9AxXsUjp1sBksRidlZuIDYDaAl2Ao7sfNlETRsExFPZw5UECNA/lHqepPc+v+h7dPI6g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>71.341_base.sdfa</Filename>
      <Signature>nfTS5bDPshEvzmKe0rVDjFGzOpOgvxR7HErQKUs+LmeENrSpydzQ2k81MjzzYkN5uDEVEjEinQ2aJRNWB7+cNQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>71.341.sdfa</Filename>
      <Signature>fLQ5vD1jKrg/yGxkdsSb1ydN3zBwNwnZtRyWmn/7hMqQGNGiNlk9kxNytDEoW8HDhBtzjvZeQmckHX7HMzvWiw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>52.041_Intraoral.stl</Filename>
      <Signature>kDzxqDI/jZizxG0INLHhKI2EFwYCaR3QIzGdmbQrmbRK2mgtOdibOGDuK26okVBE6rhvTDKl3yaIS9oTeIxk9Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>c19236.stl</Filename>
      <Signature>LT0nnol9loM0x4ICNpl/TbsjoL20aDIYi3EYRqn8NfekEzXruw1C3vM8HJem+gEIOPIPtC2fwq74vVUHvSRl9w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>NT_F_3.5.stl</Filename>
      <Signature>PErNcmEEfOA1/We2if/4dOh7wtAv0NBcltAZaumg5nEMnLicFmbaAE0z4G7bWorF7sZ6En6o/69EAKbOorHPQQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>F1400.stl</Filename>
      <Signature>nkGK3PTTX0JsTAbpc2kL1Ez5xtPLcXo9dB2fxwf826fg+dtT9FTBVEiFdDlNykklR/XfyQsAe6buenMR8bSojA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>TruAbutment_NB_AC_NP.stl</Filename>
      <Signature>x4vg4Ne8v0euFb/F1a9jmqRYLMHxrwqPa0lJdriaMbjnpFk8TPqmkOhUQco7n2rBZbvDfoaSCrJktUOyHG2qhA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>8000840 blue NB Actv NP.stl</Filename>
      <Signature>ymqyVxkJ96di309CZV0CMWB6ywzfyhYtWL3jlUcn/hm/cTAwO1/HVZtc9ANOdkx+9AdVTEvMrj8B1F40GAIPfA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>9000845 Ti NB Actv NP.stl</Filename>
      <Signature>GhuyqtEZiqAIXn9adribv9N6cYSZk6MpXbo6ugI/s3+bCVSQFgCPkCOjL+qSuTd39vFNwkn4wkplQuzMb9Q7hA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>50042_Scanbody.stl</Filename>
      <Signature>Mcz/TNmFfq1ZyP2K0ft2LHJcBleTjERkT/uecCHApCF6/3G03Lw11WvFxyROWmJNTwZDgQkw7MnrYlMJI4jx9Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>14.042.sdfa</Filename>
      <Signature>UxS8kSOfTfLgITntLC4AZKGxQclojb/s+F2cKxP+G/M2/DW5qN2iXRMvFnRfX8D0BIa8D4h4ne6S5BIY8T9piw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>19.442.sdfa</Filename>
      <Signature>VwJ4ca/L5YBODhq8OwKzCQ2ccP748WDEydFYzHupGemBlSz/fLscw7eRwDHhv201HroWyAJWG6/2+KSXv9klZA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>pell_61.342_71.342_min_thick.sdfa</Filename>
      <Signature>QyDEmDQrlyUU51+7lLhfCCmeHktb9jdjSA7CHfTKGhSUOYwgG4zJvELrNfN0EPx18B82wOU+FQPyuJeJq+TfYA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>61.342_base.sdfa</Filename>
      <Signature>onWEmDNKpBTkt+wTqo+/JGjhqjjuONiVT/a/LnUtQHFGRHpCA9YL3atyrWinC9zlwKx3HeNusi5pUJ/xP0tUGg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>61.342.sdfa</Filename>
      <Signature>wsD4sE/9Tv1m0DjC0EabyKbsLudtG0gS4L4LEX/QCc/7rDLL79gTTlp5+sON9nY3ii1ickyPUs0B7EPp6aGovA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>71.342_base.sdfa</Filename>
      <Signature>onWEmDNKpBTkt+wTqo+/JGjhqjjuONiVT/a/LnUtQHFGRHpCA9YL3atyrWinC9zlwKx3HeNusi5pUJ/xP0tUGg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>71.342.sdfa</Filename>
      <Signature>3fz0wXqSa+LlYX6Uug1udrC0Fnm4YpCJLcbMiOeEmA5jL7eFwDn5m8Vcc7JZ3CN2FCd9Fnjju81Ep7Dz/edLDA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>52.042_Intraoral.stl</Filename>
      <Signature>kDzxqDI/jZizxG0INLHhKI2EFwYCaR3QIzGdmbQrmbRK2mgtOdibOGDuK26okVBE6rhvTDKl3yaIS9oTeIxk9Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>c19237.stl</Filename>
      <Signature>ZJwhGCNkQmFMwrUeR/+HTstk0hzxrbC17UiiPK7d152kgwsxcUebA1LFC+GR2AhxCzPd8LAMHxceakmjzN4HmA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>NT_F_4.3_5.0.stl</Filename>
      <Signature>XK+SNn9VVqLlyqAHtrHK6VsxvZBHNafflxrEh55bQzAHuXVD4B+qb9nPFGZEL830xe3yse0EJxk9OkF3ejsjAw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>F1410.stl</Filename>
      <Signature>V291zg+zO6drZ4XTKeJ5utLoTvIiSMdySEmgC3jPSPtbd3eWukvhx1bHGSV8twyU+uX+9oh1g+jA+Hy2eSaVxA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>TruAbutment_NB_AC_RP.stl</Filename>
      <Signature>09X1Go++ReZNv4sJydCb7n7sOvYbWd+vXVn6N6YjLFKlgoDdO3h0Qdah2P4BvGm3ToJV9HtxDu4Sn28YfWcXTw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>8000940 blue NB Actv RP.stl</Filename>
      <Signature>/IWu7E40ct9yi1QWTFaIEPUtSF5bcjEWqTVvoVwaYYq8Q2s2PYmqctMtuyv8lUb3Nd/2euVYYsxOJlR9JTZYsw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>9000945 Ti NB Actv RP.stl</Filename>
      <Signature>WCrmJ/p60iqIPzOn1XIc6PdNkXAlUh+FvxMR6HFONgjAz9ns6Zke0shYhbyK9fuZaPp7AA5D+yvy7lh3PrnoGA==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>